PHiliphh MX40 Patient Monitor Back Cover DLP-001-09
PHiliphh MX40 Patient Monitor Back Cover DLP-001-09 Brief Introduction
The back cover of the PHiliphh MX40 patient monitor protects the monitor's internal components and provides easy access for service and
maintenance. It is usually made of durable plastic and is designed to attach securely to the back of the monitor to ensure a snug fit. The back
cover may also have ventilation slots to allow good air circulation and prevent the monitor from overheating during operation. It is important that
the back cover remains securely attached to the monitor to ensure the safety and functionality of the device.
Back Cover Description
Service personnel can find the following information on the label on the back of the MX40:
Service #: This is the Service Identification Number located on the back label and used to identify the device.
S/N: This is the Hardware Serial Number for the device located on the back label and used to identify the device.
SW SN: This is the Software License Number. It can be found on the Software License Certificate that shipped with the device.
Options: List of enabled product options on the device.
| Enabled Product Option # | Product Option |
| S01 | ECG only |
| S02 | ECG and SpO2 |
| S03 | ECG and SpO2 Ready (for future upgrade) |
| C01 | Enhanced Arrhythmia |
| C03 | 24 hours of Vitals Trends |
| J46 | Short-Range Radio |
| M02 | Impedance Respiration |
About PHiliphh MX40 Patient Monitor
The MX40 is available in three models (ECG only, ECG and FAST SpO2, or ECG and SpO2 Ready (for future upgrade)..It is supported for use
with IntelliVue Information Center version N and IntelliVue Information Center iX version A. Limited support is available when used with IntelliVue
Information Center version L or M. For more information, see the "Operation" chapter with version L. or M.” The MX40 is compatible with
IntelliVue version G or later patient monitors when connected wirelessly.
The MX40 is compatible with IntelliVue Cableless Measurements version A.1. The MX40 is compatible with the 862147 Access Point Controller,
version B.00.19 and the 865346 Access Point Controller, version C.00.04. The MX40 patient cable is compatible with IntelliVue MP2/X2,
MP5/MP5T/MP5SC, MP20/30 with MMS or X2, MP40/50 with MMS or X2, MP60/70 with MMS or X2, MP80/90 patient monitor platforms. with
MMS or X2 and MX800/700/600 with MMS or X2.
If you're interested in PHiliphh MX40 Patient Monitor Back Cover DLP-001-09,feel free to contact us .Thank you .
Product Tags:
|
|
PHiliph MX40 Patient Monitor Back Cover Casing DLP-001-09 Images
|
